- Create the ARCHICAD model close to the ARCHICAD origin, which is indicated by a black cross on the floor plan. Loss of precision or malfunction can be experienced if the project elements are located very far from the project origin or from each other
- Create the ARCHICAD model orthogonally.
Coordinates and Orientation – Real World (option1)
To export an ARCHICAD IFC model to a real world location for it to be imported into an analysis application (Navisworks, Solibri) we recommend the following:
- Set up a new ARCHICAD file which contains the site situated at real world coordinates. Also set up the stories’ Elevation values to the real world Z coordinate. See Stories/Levels – Real World (option1) for more info.
- Take the building model we created earlier which is situated at 0,0,0, and hotlink it into the site model.
- Drag the hotlink module to the desired X/Y position.
- Rotate the hotlink module to the correct orientation (Angle to True North).
- Export to IFC with the IFC Site location option set to ‘At Project Origin’. This option is at IFC Translator > Export Options > Geometry Conversion Options.
Coordinates and Orientation – Real World (option2)
Starting with ARCHICAD 20, the Survey Point definition and it’s export and import with IFC models is supported. It is recommended to use a common anchor/reference point (so-called “Survey Point”) to facilitate coordination of models from different programs. In some countries, the use of a particular reference point (national datum) is a standard requirement when defining the project.
- Use the survey point if a common point is agreed among all project stakeholders and they will all be using the survey point object!
- In ARCHICAD 20 the survey point is part of the ARCHICAD Built-in Libraries
- In the survey point settings, set the “Project North” and coordinate the “Project North” among all disciplines!
- Export the IFC with IFC site location at survey point position setting.