You may wish to modify a Library Part of a library included in an LCF (Library Container File). You may wish to do so with the ARCHICAD default library LCF or with an LCF from a library developer. One option is to place the object you wish to modify, then open it for editing and use the Save As command to save it under a new name. Then you will be able to freely modify this saved instance. In other cases you may want to modify several Library Parts or you wish to have the Library Parts available in their hierarchical folder structure on your hard drive and not packed in a single file. One example for this would be a Library Developer or a BIM Manager who is constantly developing and modifying the Library Parts in the library. Recreating the LCF after each modification would be time wasting. In this case it is best to simply extract the LCF and access the files in the extracted location.
Here is how to do it: For this example, let us work with the ARCHICAD default LCF. The procedure is the same for any LCF. Important note: GRAPHISOFT does not recommend modifying the default ARCHICAD Library because in that case no library updates can be applied since the update is looking for the original, unmodified ARCHICAD Library. Or, if you restore the original ARCHICAD Library and apply the update to it, all customizations to it will have to be redone.






Here is how to do it: For this example, let us work with the ARCHICAD default LCF. The procedure is the same for any LCF. Important note: GRAPHISOFT does not recommend modifying the default ARCHICAD Library because in that case no library updates can be applied since the update is looking for the original, unmodified ARCHICAD Library. Or, if you restore the original ARCHICAD Library and apply the update to it, all customizations to it will have to be redone.