Issue description
Grid elements are not displayed when exporting to an IFC file. How to fix this?
Solution
To ensure grid elements are displayed correctly when exporting to an IFC file, follow these steps:
1. Check the exported IFC in an IFC viewer:
- Verify the exported IFC file using an IFC viewer. Avoid using Archicad for verification, as the IFC model is converted during import, making verification inaccurate.
- Recommended free IFC viewer: Solibri Anywhere.
-
Note: In some IFC viewers, the grid may need to be made visible separately.
In case of Solibri, you can access Grids from two paths:
1. File › Settings › Footprints › Grid › Show Grid - enable checker
2. At the user interface:Show Footprint Controls ›
Show/Hide Grids
2. Verify grid visibility in Archicad:
Ensure the following:
- The Layer of the Grid is turned ON.
- The Renovation Filter that the Grid belongs to is set to SHOWN.
- The Design Option that the Grid belongs to is set to SHOWN.
3. Check grid element selection settings for 3D view:
- Confirm the option Display in 3D is activated.
- Under Grid Line, ensure the option Show as Line is activated.
- Verify that the surface material assigned to the marker text is not missing.
Please see further information on the Grid Tool.
4. Review IFC Translator settings:
- Navigate to File > Interoperability > IFC > IFC Translators.
- Select the appropriate IFC Translator from the Translators for Export tab.
- Go to Model Filter > Edit or Create New Preset.
- Ensure that the Grid Systems and Elements option is checked under the Select 2D Elements to Export.
Ensuring the visibility of grid elements in an IFC file requires thorough verification and adherence to specific settings.