Railing's Inner posts do land on Stair's steps

Issue Description

You have placed an Associative Railing on a Stair, but the railing's inner posts do not align with the Stair's steps, or are landing at inconsistent positions across treads.

Solution

1. Select the Stair and open the Stair Selection Settings.

2. Note the Tread Going dimension, it is advisable to use a Fixed Going Depth.

   

3. Close the stair settings, select the Railing and open the Railing Settings.

4. Open the Segment section and set Pattern Distribution to Fixed Length. 

   

   TIP: Changing the Pattern Position will also help align the Inner Posts.

5. Go to the Inner Posts tab, and in the Inner Post Settings modify the value Distance from Previous.

6. Using a fixed Tread Depth on the Stair, becomes useful when you modify the distance between Inner Posts, as this allows you to find a distance where the posts will land on the steps.

   

7. Here is the result of the process: