Issue Description
If you need to schedule doors to reflect the room they are connected to, the door objects can recognize the Zone they are next to if certain protocols are followed.
Solution
Conditions to be met for a Door Schedule to Display related Zone Name/Number:
• The edge of the Zone must align precisely with the face of the wall that the door is hosted in.
• The Door settings under [Door Name] Settings > Descriptions must have the checkbox set accordingly [Door belongs to the Zone into which it swings] - This can vary depending upon the placement and swing direction of the door.
• The Door, Wall and Zone must all have the same Renovation Status (Existing, Demo, New)
• The Zone must be in the same Z-height as the Wall and Door.
• No matter if layers are on/off there should only be one Zone occupying the space adjacent to the door.
(There might be more conditions. These are just the ones I can think of off the top of my head.)